Millerp
Senior Member
- Joined
- Feb 3, 2004
- Messages
- 610
- Reaction score
- 14
Looks like each of your shoulders has a different slope and the length of the right half of the yoke should not be the same as
the length of the left half of the yoke. I'm not sure MTM can accommodate such differences. If this is online MTM and
you submit your own measurements, the best thing you can do is send these pictures to the maker and see if they can
do anything.
If this was bespoke, the shirt would be pinned and a specific cut would be made for you with two different shoulder constructions based on your
different shoulders, but that's difficult to achieve with MTM.
This is my 3rd MTM shirt with the same company, and although I'm getting most measurements pretty well dialed in, my dropped shoulder is still causing some problems.
What, specifically, do I need to request on my next order to smooth out the chest (especially near the left armpit) in the first and second photos, and also to eliminate that big wrinkle across the right shoulder blade in the third photo?
Looks like each of your shoulders has a different slope and the length of the right half of the yoke should not be the same as
the length of the left half of the yoke. I'm not sure MTM can accommodate such differences. If this is online MTM and
you submit your own measurements, the best thing you can do is send these pictures to the maker and see if they can
do anything.
If this was bespoke, the shirt would be pinned and a specific cut would be made for you with two different shoulder constructions based on your
different shoulders, but that's difficult to achieve with MTM.
Last edited: