Sunstealer73
Senior Member
- Joined
- Jul 30, 2012
- Messages
- 186
- Reaction score
- 152
Fit looks good to me.
UNIFORM LA CHILLICOTHE WORK JACKET Drop, going on right now.
Uniform LA's Chillicothe Work Jacket is an elevated take on the classic Detroit Work Jacket. Made of ultra-premium 14-ounce Japanese canvas, it has been meticulously washed and hand distressed to replicate vintage workwear that’s been worn for years, and available in three colors.
This just dropped today. If you missed out on the preorder, there are some sizes left, but they won't be around for long. Check out the remaining stock here
Good luck!.
STYLE. COMMUNITY. GREAT CLOTHING.
Bored of counting likes on social networks? At Styleforum, you’ll find rousing discussions that go beyond strings of emojis.
Click Here to join Styleforum's thousands of style enthusiasts today!
Styleforum is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Wondering the same please!To all the guys who have a Billy Reid Pea Coat in MEDIUM or LARGE
Can someone please post the pit-to-pit measurements... about to pull the trigger but haven't got any useful measurements from the site or emailing them directly (their answer was...about 21 inches! I would like proper measurements) also all the research I have done says there's quite a bit of variation even within the size range.
Thanks in advance!
Really? I found the measurements on Billy Reid website for the large to be reasonably close. My large charcoal peacoat (since sold - but I did keep the measurements) had a pit-to-pit of 21.5 inches. The shoulder was 18.5 inches, and the sleeve length from shoulder to cuff was 26.5 inches. So, slightly bigger in the chest, smaller in the shoulders, and longer in the sleeves, but all within around half-an-inch of what is on the website.To all the guys who have a Billy Reid Pea Coat in MEDIUM or LARGE
Can someone please post the pit-to-pit measurements... about to pull the trigger but haven't got any useful measurements from the site or emailing them directly (their answer was...about 21 inches! I would like proper measurements) also all the research I have done says there's quite a bit of variation even within the size range.
Thanks in advance!
I'm unsure, but I just trawled through another forum and I think your coat might of been first runs, so sizing might have been a little different to the production runs they have now, Anyways thanks for the help. I'm definitely in-between sizes .. tough choices HAHADue to the nature of the Billy Reid size tags, could it have been mismarked?
I'm unsure, but I just trawled through another forum and I think your coat might of been first runs, so sizing might have been a little different to the production runs they have now, Anyways thanks for the help. I'm definitely in-between sizes .. tough choices HAHA
It's a tough one!I was looking at ordering one but can't afford for it to be an exchange/return being in Canada. I'm a 43" chest and 19" shoulder and 5'9", think I might be between M & L too.
Just bought this off of ebay. 1967 is what i get from the label, double stitching above sleeve hem. Corduroy pockets. Two tiny moth bites what i have seen, otherwise very good condition.
Size 36R.
P2P 20 inch
Shoulders 19 inch
My true chest is 38 inches, 155 LB, waist usually 29-30 in pants, or 36 suit pant size, the suit jackets i wear usually 38.
What do you think of the fit? I can still wear a thick sweater underneath, but then when i "hug" forward it is pretty tight in the back so i do not think i can go down to 34.
I think i can slim it down through the waist though, and of course hem the sleeves, but i always have to do that.
Length? Sleeve width? Chest?
I was looking at ordering one but can't afford for it to be an exchange/return being in Canada. I'm a 43" chest and 19" shoulder and 5'9", think I might be between M & L too.
Thanks for the heads up, I'll check in there next time I'm no TO.The Bay at Eaton Center (Toronto) was selling it for a while last year. It definitely fits a bit weird from what I can remember.