masshi
Distinguished Member
- Joined
- Sep 26, 2010
- Messages
- 1,837
- Reaction score
- 447
Get the best of both worlds with this DR3 and A2 bundle from the one and only brand, Falcon Garments. These jackets are both MTM, but are both pretty close to a stock size 44 (please refer to the attached photos).
DR3:
Measurements:
- shoulders: 16.3"
- chest (pit-to-pit): 18.3"
- waist: 17.3"
- body length, front: 19.5"
- body length, back: 21.5"
- sleeve length, from shoulder: 23.0"
- sleeve width @ pit: 6.5"
- sleeve width @ elbow: 5.8"
- sleeve width @ cuff: 4.5"
Body measurements I submitted:
- height: 5'8"
- weight: 125 lbs.
- shoulders: 16.25"
- chest: 33.5"
- midsection: 28" @ belly button, 26.75" @ slimmest part of torso
- waist/hips: 31"
- front length: 19.5"
- sleeve length: 23"
- biceps: 9.5"
---
This DR3 is made in black calf and has silver hardware.
It has been worn no more than 8 times and obviously still has a lifetime's worth of wear still in it. Unfortunately, the jacket does have pencil marks, a few other marks in the leather, and unclean stitching here and there as is typical with jackets made in calf and with the double riders/motos in general (the marks are not from wear!). One of the lapels also seems to overlap the epaulet moreso than it does on the other side, though I was advised by Charly that the leather could be trained/molded to where it sits more evenly.
Here's a link to pics of some of what I'm describing above:
http://imgur.com/a/lfgRI
---
A2:
Measurements:
shoulders: 16.3"
chest (pit-to-pit): 18.8"
waist: 17.5"
body length, front: 21.5"
body length, back: ? (I changed Charly's initial suggested front length, which consequently changed the back length, but I don't know what the exact measurement is.)
sleeve length, from shoulder: 24.5"
sleeve width @ pit: 6.7"
sleeve width @ elbow: 6.0"
sleeve width @ cuff: 5.2"
Body measurements I submitted:
- height: 5'8"
- weight: 125 lbs.
- shoulders: 16.25"
- chest: 33.5"
- midsection: 28" @ belly button, 26.75" @ slimmest part of torso
- waist/hips: 32.75"
- front length: 21.5"
- sleeve length: 24.5"
- biceps: 9.5"
---
This A2 is made in brown lamb and has silver hardware. It also has the full-length placket.
This jacket has never been worn out (only tried on indoors). Selling it because I'd like to re-order another one with slightly different measurements.
There are veins in the lamb, but other than that there are no marks or stitching flaws or anything else of the sort (the bombers and double riders are made by different people; the former are made much more cleanly and with more attention to detail/quality in my experience).
---
Trying to sell these as a set, but I am open to selling them individually depending on the interest/responses I get.
Please add $30 for shipping. Alternatively, if you happen to live in the San Francisco Bay Area, we can arrange a meet-up and you can pick these up in person.
If you have any questions, please feel more than free to contact me via PM. I usually respond within a day.
Thanks for reading.
DR3:
Measurements:
- shoulders: 16.3"
- chest (pit-to-pit): 18.3"
- waist: 17.3"
- body length, front: 19.5"
- body length, back: 21.5"
- sleeve length, from shoulder: 23.0"
- sleeve width @ pit: 6.5"
- sleeve width @ elbow: 5.8"
- sleeve width @ cuff: 4.5"
Body measurements I submitted:
- height: 5'8"
- weight: 125 lbs.
- shoulders: 16.25"
- chest: 33.5"
- midsection: 28" @ belly button, 26.75" @ slimmest part of torso
- waist/hips: 31"
- front length: 19.5"
- sleeve length: 23"
- biceps: 9.5"
---
This DR3 is made in black calf and has silver hardware.
It has been worn no more than 8 times and obviously still has a lifetime's worth of wear still in it. Unfortunately, the jacket does have pencil marks, a few other marks in the leather, and unclean stitching here and there as is typical with jackets made in calf and with the double riders/motos in general (the marks are not from wear!). One of the lapels also seems to overlap the epaulet moreso than it does on the other side, though I was advised by Charly that the leather could be trained/molded to where it sits more evenly.
Here's a link to pics of some of what I'm describing above:
http://imgur.com/a/lfgRI
---
A2:
Measurements:
shoulders: 16.3"
chest (pit-to-pit): 18.8"
waist: 17.5"
body length, front: 21.5"
body length, back: ? (I changed Charly's initial suggested front length, which consequently changed the back length, but I don't know what the exact measurement is.)
sleeve length, from shoulder: 24.5"
sleeve width @ pit: 6.7"
sleeve width @ elbow: 6.0"
sleeve width @ cuff: 5.2"
Body measurements I submitted:
- height: 5'8"
- weight: 125 lbs.
- shoulders: 16.25"
- chest: 33.5"
- midsection: 28" @ belly button, 26.75" @ slimmest part of torso
- waist/hips: 32.75"
- front length: 21.5"
- sleeve length: 24.5"
- biceps: 9.5"
---
This A2 is made in brown lamb and has silver hardware. It also has the full-length placket.
This jacket has never been worn out (only tried on indoors). Selling it because I'd like to re-order another one with slightly different measurements.
There are veins in the lamb, but other than that there are no marks or stitching flaws or anything else of the sort (the bombers and double riders are made by different people; the former are made much more cleanly and with more attention to detail/quality in my experience).
---
Trying to sell these as a set, but I am open to selling them individually depending on the interest/responses I get.
Please add $30 for shipping. Alternatively, if you happen to live in the San Francisco Bay Area, we can arrange a meet-up and you can pick these up in person.
If you have any questions, please feel more than free to contact me via PM. I usually respond within a day.
Thanks for reading.
Attachments
Last edited: