- Joined
- Jan 12, 2013
- Messages
- 11,951
- Reaction score
- 16,235
We were on the subject of vsc. I really like it for cleaning up welt stitching. I cut down the bristles on a 1" artists paint brush so they are about like a stiff tooth brush, working in @ 3" sections squirt on some vsc with a hobby syringe and scrub.Before everything gets dry I wipe the brush on a rag and wipe out the residue with an old microfiber. Repeat.
Awhile back some folks asked about adding brass or stainless eyelets.
You will have to carefully pull out the old inside eyelet with a pair of needle nose pliers and punch a bit larger hole but the rest goes like this.
https://www.amazon.com/vdp/f83327164510453590e59b8cc2c3b1f4?ref=cm_sw_em_r_ib_dt_yV9rHrPhDBC0q
Awhile back some folks asked about adding brass or stainless eyelets.
You will have to carefully pull out the old inside eyelet with a pair of needle nose pliers and punch a bit larger hole but the rest goes like this.
https://www.amazon.com/vdp/f83327164510453590e59b8cc2c3b1f4?ref=cm_sw_em_r_ib_dt_yV9rHrPhDBC0q