Discussion in 'Classic Menswear' started by Mr. Moo, Feb 28, 2011.
bad music, cool video:
Hello Glenjay Thank you for your comment. I have never seen tongue pads in the UK. Do you know a source?
Wurger, is it safe to 'bend' shoes in the way that you suggest? I guess it must be, given that you have suggested it but have you done it yourself?
Thanks to both of you.
By a circuitous route, I have found a pair of tongue pads on the net! I will give them a try.
Yes, it is, some shoe sales even flexes them for you, it's no different to our foot bending.
However, it does produces the maximum amount of creases and wrinkles, so I only done to it a pair of loafers and full brogues.
Tongue pads are a good start.
Hey guys, I recently took a gamble on some used Loakes online and lucked out on their fit and condition Since they are in great shape overall, I am only planning to Reno + cream polish them (this is my first pair of big boy shoes). I have a few questions I hope you guys can help me answer:
1. What color should I get? I'm thinking light brown but tan and cognac also sound plausible.
2. Is cream a better option than wax? I *think* I've gotten the gist of the difference between them. I'm not sure I'd want a mirror polish on these and I think they look really nice as is, but a lot of the recommendations call for a few layers or cream and then a layer of wax to protect. Should I still apply both even though I don't want a mirror finish? Since these are mint, I don't relly need to restore the color - maybe Reno is all I really need?
Slightly OT, but I didn't want to start a new thread. I'll remove if this derails the thread (or mods, feel free to do so):
3. Any suggestions for a matching dress belt? Loake doesn't seem to carry them.
Wurger and Chogall,
Thanks, that is very interesting. I had imagined that labor should have much more influence on price than did materials, but I can see that buying an entire hide and getting only one pair of shoes out of it also could be expensive.
From Wurger's explanation, it appears that much of what you get at these high price points is far more attention to detail, which must be time consuming. Plus, I imagine that there is a rigorous threshold for deciding a shoe came out at the standard the manufacturer expects. At that point there would be nothing to do but toss it (unless they company was willing to sell seconds or rejects). At that point they would lose both materials and labor when something goes wrong and there are defects that a shoeficiando would notice.
The esthetic differences have to be things that are difficult or impossible to reproduce in volume. If it were just they style of shoe, then the high volume manufacturers could copy the design, if not the construction details. Interesting to see what they are.
Can I assume that making the entire upper out of single piece of leather is along the same lines? It required finding a large flawless piece, and then the shows off the labor of a highly skilled craftsperson? Few people who run the machines at shoe factory could make a shoe like this at all, even if they were given the time and materials to try?
As I said, I could not impose on a salesperson's time to satisfy my curiosity. Just as I wonder how a Bentley is different than a Volvo, I am not going to go to a dealer and look. Sales work is hard enough, and high end shops have to put up with lots of dilettante shoppers as it is. Much better to get the answer from someone at SF, who is not losing money teaching others about shoes.
Fitting shoes that are too big: I do a lot of this since my weird feet do not conform with any standard last and, as above, I am not about to buy bespoke. One can buy, or make, inserts that fill up volume, with or without arch support, up to the ball of the foot without extending under the toes. Then you can have the volume reduced where needed, but not lose any toe room.
They are very close in color to a pair of another pairs of shoes I have. It was not until I received the color guide that I was able to more accurately choose which color.
You may wish to obtain the chart before choosing.
Placing your shoes over various "holes" in the chart will provide a good match.
High-end shoes cost more for many reasons, and higher quality materials is one of the largest ones. While the looks of high quality leather are very important, the durability of high quality leather isn't disputable compared to cheap leather. There is plenty of data to support this. Here are some websites that you can read through:
Your comment about AE and Alden lasting a long time as evidence that leather quality isn't correlated with durability isn't accurate. AE and Alden do use high quality leathers. AE has been known to offer some corrected grain options, but they are the exception to the rule. Perhaps they are not as high quality as the $1,000+ brands, but the traits of high quality leather that is being discussed in the articles I posted above are going to be found in AE and Alden shoes just as they are in the $1,000+ shoes. The difference is that the more expensive brands utilize only the specific areas of the highest quality hides to make shoes just as wurger pointed out above.
The question about the construction of top quality shoes has been pretty much covered in the last couple of pages of this thread from the last week or so. Read through the posts regarding hand-welting, Goodyear-welting, and Blake/Rapid from the past week and see if that answers your question.
DWFII's stance on the shoe industry is a complex and loaded conversation. However, it isn't quite fair to say that he believes that hand-welting is the only right way to make a shoe. He is fully aware of the economic situation present in the shoe industry (though he laments it) and recognizes the value of different shoe types and constructions. He simply wants people to be aware of the fact that Goodyear-welted shoes are not the best option available. He is fully aware that most people can't afford to pay thousands of dollars for shoes. Where he gets frustrated is with people who do spend thousands of dollars on shoes (generally Goodyear-welted ones), believing that they are getting the best, when they aren't. He isn't referencing leather quality in these discussions generally speaking. He is referencing the welting techniques. There are people around here who have $30,000 worth of shoes, and not a single one of them are hand-welted. He is simply trying to say that if you have that kind of disposable income to spend on a product, you would be better off buying the best. His passion to preserve the history of shoe making and the argumentative/defensive responses that he often gets when discussing that brings out a more vehement stance that isn't fully representative of his basic opinion, I think. People are known to jump on him and get defensive of their $30,000 shoe collection at the mere notion that they aren't the best available, and the debate quickly gets heated up.
I think DWFII's stance on Goodyear-welted shoes can be summed up simply as this: They have their place. The different companies using that construction introduce different levels of quality and finishing to make their product more marketable, but they almost never impact the durability of the shoe. Rather, they simply make them more beautiful to look at, and more of a niche product that appeals to those with the money to spend on them. However, they rapidly approach the same cost as a pair of shoes that he could make himself but would be much better in construction, materials and durability. Therefore, they are fun to look at on the internet, but aren't worth the money to him. If you are strictly utilitarian driven in your shoe purchases, with highest regard for durability value for the money, I think he would say that you need to consider one of the brands that falls into the $300-500 price range (perhaps up to $700 if you are looking at shell cordovan. Anything above that is simply prettier to look at.
Excellent video, Tristan.
The video also shows several scenes on the polishing of the sole too . . . which helps present the entire shoe in a new-like condition.
Those are new shoes. You aren't seeing the guy turning a worn sole into a "new-like" appearance. He is simply keeping the show-room sheen on his stock of shoes that are for sale.
Thank you for your posting: I found it very interesting - especially alongside your response, Money.
Thank you, too, for your comments on shoes that seem too large. I have a pair of tongue pads on order and I am currently using arch supports, which seem to be a reasonable compromise. I'm still a bit nervous of wurger's suggestion that I bend my brogues by bringing the toe up towards the back of the shoe...does anyone else have experience of doing this?
Not to say that cost cutting isn't present in hand welted shoes but all or almost all Goodyear welted shoes contains cost saving technique and materials between different places, such as the use of heat formed heel or toe stiffener, canvass lining, hidden steel eyelet reinforcement, fiberboard insole, etc.
This is certainly true. Fortunately, it is relatively easy to figure out which brands do this, and what parts of the shoe this is done on. All of the "StyleForum Approved" brands, as far as I know, use acceptable materials. The only exception being heat formed heel and toe stiffeners, which are actually very prevalent. Please correct me if I am wrong on any of that.
EDIT: Allen Edmonds definitely makes some shoes with inferior insoles (Poron covered fiberboard). However, they aren't trying to deceive anyone as far as I can tell with that.
I think there are places where synthetic materials are not necessarily bad. I topyed most of my shoe, and I know some of the cheaper ones I used to have probably have synthetic toe puff and as far as durability goes, I can't see the difference...
Separate names with a comma.