• Hi, I am the owner and main administrator of Styleforum. If you find the forum useful and fun, please help support it by buying through the posted links on the forum. Our main, very popular sales thread, where the latest and best sales are listed, are posted HERE

    Purchases made through some of our links earns a commission for the forum and allows us to do the work of maintaining and improving it. Finally, thanks for being a part of this community. We realize that there are many choices today on the internet, and we have all of you to thank for making Styleforum the foremost destination for discussions of menswear.
  • This site contains affiliate links for which Styleforum may be compensated.
  • STYLE. COMMUNITY. GREAT CLOTHING.

    Bored of counting likes on social networks? At Styleforum, you’ll find rousing discussions that go beyond strings of emojis.

    Click Here to join Styleforum's thousands of style enthusiasts today!

    Styleforum is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

How to Hem with a Sewing Machine

Alexander Joe

Member
Joined
Sep 10, 2013
Messages
15
Reaction score
0
The easiest way to learn a new sewing technique is by practicing it when you are not under pressure. You ideally should have some extra time to really look at the fabric and the way the seam is created as it runs through the machine. Sewing machine hemming is no exception to this. It is a little bit tricky to learn but once the technique is mastered you will wonder why it ever seemed difficult.
What You Will Need for Machine Hemming
The list of things you will need for hemming with a sewing machine includes a threaded zigzag sewing machine, a piece of fabric or garment to hem, a ruler, tailor's chalk, and straight pins. It is best to follow all of the steps while you are learning this but if you are just practicing on a scrap of fabric you will be able to manage without using the tailor's chalk, ruler, and pins.
How to Prepare the Hem
Zigzag stitch around the raw edge to finish the fabric. This will prevent fraying. Measure the hem, mark it with the tailor's chalk, and fold it under. 1 inch or less is the usual width of a hem, but fold it according to your length needs if you are working on a garment. Hold the fold in place by inserting a straight pin about every 4 inches. Fold the hem back so it is laying on the outside of the fabric. It should look almost like a little cuff with 1/4 inch of the fabric's finished edge exposed. Pin this second fold every 3 inches with the straight pins.
Using the Sewing Machine to Make the Hem
Set the threaded sewing machine on its widest, longest, zigzag stitch. Lift the presser foot on the sewing machine and slide the folded fabric under it. You should be looking at the wrong side of the fabric laying on the left side of the machine and the little cuff should be underneath. Only the 1/4 inch of the fabric's raw edge should be exposed and laying on the presser foot and right side of the needle. The folded edge needs to be slightly to the left of the needle hole in the sewing machine. Lower the foot when the fabric is properly seated in the machine.
Sew slowly, making sure the needle is just barely catching the fold of the fabric. The largest part of the zigzag needs to be falling on the little slice of finished fabric edge. Over lap a few stitches at the end if the hem is on a garment. Unfold the hem. Gently pull and smooth the stitches until the hem is smooth. Ironing the finished hem is recommended but optional.
 

Featured Sponsor

How important is full vs half canvas to you for heavier sport jackets?

  • Definitely full canvas only

    Votes: 92 37.6%
  • Half canvas is fine

    Votes: 90 36.7%
  • Really don't care

    Votes: 26 10.6%
  • Depends on fabric

    Votes: 41 16.7%
  • Depends on price

    Votes: 38 15.5%

Forum statistics

Threads
506,917
Messages
10,592,665
Members
224,334
Latest member
winebeercooler
Top