FlamingModerate
Member
- Joined
- Dec 22, 2010
- Messages
- 15
- Reaction score
- 0
I just received my first try of a MTM shirt from ModernTailor. I took my best fitting shirt and made a couple modifications in order to come up with these measurements. While I am mostly satisfied, I do think that some changes are in order.
I have three areas of concern:
1. An awful lot of fabric is bunching up where the upper back meets the sleeve. Can I correct this by reducing the armhole size?
2. The pulling of the fabric along the neck/upper back area. Is this because my shoulder measurement is too small?
3. The lay of the fabric from the top two buttons, the placket is pulling away.
I also plan to reduce the waist, hip, and cuff measurements slightly.
I have three areas of concern:
1. An awful lot of fabric is bunching up where the upper back meets the sleeve. Can I correct this by reducing the armhole size?
2. The pulling of the fabric along the neck/upper back area. Is this because my shoulder measurement is too small?
3. The lay of the fabric from the top two buttons, the placket is pulling away.
I also plan to reduce the waist, hip, and cuff measurements slightly.