New Posts  All Forums:Forum Nav:

Plumbing

post #1 of 15
1/4/09 at 9:35pm
Thread Starter 
I'm planning on renovating a place that was built in 1948. I'm pretty sure it has all the original plumbing and fixtures still in it. I was planning on gutting the entire thing, plaster and all, and putting in new plumbing, electrical and insulation.

Is it absolutely necessary for a house built in the 40s to have the plumbing redone?
Reply
Reply
post #2 of 15
1/4/09 at 11:03pm
Not at all especially if you have copper. Lead or galvanized pipes would likely need replacing. I have an early 30's home with the original copper plumbing and heating lines. Over the years I have cut in and expanded in several places for additional appliances and in each case the copper was as smooth as the day it was installed. Good luck!
Reply
Reply
post #3 of 15
1/5/09 at 12:03am
Thread Starter 
I'm thinking the piping might be copper, I just worry that there is lead in the solder.
Reply
Reply
post #4 of 15
1/5/09 at 2:03am
All modern plumbing solder I've used was lead solder. 50/50 tin & lead.
You can now buy lead free solder but I think its a pretty recent development.

So I wouldn't worry too much about it.

I know that lead free solder for electronics (if you see something that says RoHS, it would probably cover this) has a tendency to develop micro cracks and fail over time. So lead free might not be ideal.
Reply
Reply
post #5 of 15
1/5/09 at 4:23am
Thread Starter 
I'm going to get a lead kit for both the water and paint to see how much I'm being exposed to. Might as well do asbestos while I'm at it.
Reply
Reply
post #6 of 15
1/5/09 at 2:39pm
Have fun! That sounds like a cool project.
Reply
Reply
post #7 of 15
1/5/09 at 3:08pm
Quote:
Originally Posted by tiecollector View Post
I'm going to get a lead kit for both the water and paint to see how much I'm being exposed to. Might as well do asbestos while I'm at it.
Sometimes it is just better to not know.
Reply
Reply
post #8 of 15
1/5/09 at 5:12pm
Quote:
Originally Posted by Dakota rube View Post
Sometimes it is just better to not know.

yeah, I keep thinking I'm going to check the paint for lead, but I get home and forget these things. Actually I forget lots of things when I get home. Not sure what's going on there. Maybe I'll check the paint for lead when I get home.
Reply
Reply
post #9 of 15
1/5/09 at 5:23pm
^As often as you're getting laid, it is easy to see how other stuff would, um, slip your mind...
Reply
Reply
post #10 of 15
1/5/09 at 9:30pm
Thread Starter 
It looks like Home Depot carries the test kits for pretty cheap for paint and water, but doesn't look like they have anything to test for asbestos.

While I have the place gutted, I might as well spend a couple grand to make sure it's all lead free.
Reply
Reply
post #11 of 15
1/5/09 at 10:37pm
Quote:
Originally Posted by tiecollector View Post
It looks like Home Depot carries the test kits for pretty cheap for paint and water, but doesn't look like they have anything to test for asbestos.
Asbestos doesn't hurt you as long as you leave it alone, IIRC.
Reply
Reply
post #12 of 15
1/5/09 at 10:39pm
Thread Starter 
Quote:
Originally Posted by Dakota rube View Post
Asbestos doesn't hurt you as long as you leave it alone, IIRC.

True, but if it's an easy fix, might as well.....
Reply
Reply
post #13 of 15
1/6/09 at 12:36am
^I don't think there's an "easy" within $50,000 of asbestos.
Reply
Reply
post #14 of 15
1/6/09 at 10:58pm
Whenever moon suits are involved it can't really be cheap....
Reply
Reply
post #15 of 15
1/6/09 at 11:19pm
Maybe you could rent a few NASA suits on the cheap, seeing as how the fed has racked up a bit of debt.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home