or Connect
Styleforum › Forums › Men's Style › Streetwear and Denim › ***The official Alden thread ***
New Posts  All Forums:Forum Nav:

***The official Alden thread *** - Page 3561

post #53401 of 87862
Quote:
Originally Posted by fiestaplatypus View Post

PSA: The one-piece Horoween shell belts are now available for sale on their site

 

Quote:
Originally Posted by mediahound View Post

link - http://horween.bigcartel.com

 

Every time I go to that website, I am reminded about those Handsewn Chromexcel Oxfords (sold out).  How the heck did those only cost $50.00?  

Styles mentioned in this thread:

post #53402 of 87862
Quote:
Originally Posted by sevenfoldtieguy View Post

The AE chili edge dressing applied to Alden's antique edging will make it slightly darker with a hint of red. Level of shine is determined in large part form the way in which one applies said dressing (wiping off excess shortly after application reduces the shine - i recommend this route).

Using the chili dressing produces the look i personally prefer, and I use it on numerous Alden models - whiskey, ravello, cigar, snuff suede.

I have walnut polish as well as chili edge dressing so I'll compare them both.

Do you have any experience with Allen Edmonds Natural edge dressing? I have a pair of natty cxl PTBs that I need to do the edges on too and really don't want to add color any color to them, but just protect them.
post #53403 of 87862
Quote:
Originally Posted by MoneyWellSpent View Post

 

 

Every time I go to that website, I am reminded about those Handsewn Chromexcel Oxfords (sold out).  How the heck did those only cost $50.00?  

There was only one of them  and they were mock up.  I suspect they were wearable, but may not have been ready for prime time.

post #53404 of 87862
Quote:
Originally Posted by Yaniel View Post


I have walnut polish as well as chili edge dressing so I'll compare them both.

Do you have any experience with Allen Edmonds Natural edge dressing? I have a pair of natty cxl PTBs that I need to do the edges on too and really don't want to add color any color to them, but just protect them.

 

It sounds like the natural edge dressing is exactly what you are looking for then.  It is perfect for sealing the leather, and adds a nice sheen to the sole and heel edges while not altering the original color of the leather.  I use it on my shoes with a natural welt and think it looks great.

post #53405 of 87862
Quote:
Originally Posted by aldenwear View Post

There was only one of them  and they were mock up.  I suspect they were wearable, but may not have been ready for prime time.

 

Ahh, that makes more sense.  I didn't see them until they were already sold out, so I didn't know the background on them.  

post #53406 of 87862
Quote:
Originally Posted by chipshot View Post


Because of the added length .. Jim of Alden SF suggests on the slip on's Aberdeen last tassels go down 1/2 from Van and Barrie. I have a low volume foot so this might work for me. The Aberdeen tie model he suggests TTS. Wondering what Uncles take is on this staple shoe sizing?

No uncle here.  (Actually, I do not understand the reference for this "uncle" "nephew" business - I guess I came in on the story in the middle, but that is another, and not so important, topic).  I am responding -- forgive me if it is inappropriate and, of course, feel free to disregard -- because I am a longtime owner of Alden shoes on a number of different lasts and recently had a similar experience with Alden slip-ons that you may find helpful.  

 

I am a big fan of NST's and own a number of such Alden models.  I have bought some NST loafers from Alden in NYC that are on the Grant last.  I wear 7.5E in true-to-size Alden lasts of which Grant (and, for me, Aberdeen) is one.   So I asked for these shoes in that size.   

 

I am not so proud to say they know me at Alden NYC.  Because these shoes were slip-ons with a high vamp (a design characteristic that the Alden full strap and tassel loafers on the Aberdeen last share), I was encouraged to size down 1/2 size and get 7E to avoid heel slip.  The sales associates are incredibly helpful and knowledgeable and I took the advice.  

 

This did not work for me.  The ball of my foot hit the 7E too far forward in the shoe -- too much towards the toebox.  My forefoot was also too far forward in the shoe, thus the widest part of my foot was beyond the widest part of the shoe and was a bit squeezed.  Neither of these was a terribly big deal, and the shoes were imminently wearable.  These were noticeable, however, and I would have preferred not to experience them, so I exchanged for my typical size to see what would happen.  Much better for me:  the shoes are looser on my feet in the 7.5E.  But the shoes are well on my feet, my heel lifts ever so slightly, but not out of the shoe, they are comfortable, I think they look great, and I am very pleased.  

 

I take the moral of this story to be that fit can be individual and, in many instances, is driven by preference rather than ineluctable rules.  For example, I suspect the initial recommendation I received about the NST loafers was based upon a lot of experience where many wearers prefer snugness and certainty that the shoe is not moving on their feet and would not like the looseness that I prefer.  

 

As to Aberdeen last shoes, they fit me no appreciably differently than Alden shoes made on other other true-to-size lasts and I wear the same size in all of them.  Apparently, some people size differently on Aberdeen than other lasts.  

 

Our feet are all different, and we experience the sensations of our feet differently -- some are more sensitive than others; some just have clubs down there and rags would not feel much different to them than baby's-butt-soft-French calf.  

 

Nothing beats try on.  It should not take long to figure out your sizing.  If you are not near a store, I have found that almost all Alden retailers are very easy to work with on finding the right size.  Best of luck and have fun.  

post #53407 of 87862

Frustrating, in order cover the variation in lasts my searchs on Ebay includes 10.5 and 11. Everytime there's a great pair of shoes that pops up it's in the wrong size. #8 NST .5 size too small, Whiskey LWB .5 size too big, brown suede Indys a .5 size too big, Ravello Captoes .5 size too small. Drat!

post #53408 of 87862
Quote:
Originally Posted by rydenfan View Post

Uncle,
It is actually an issue of width. The 8D fits me perfectly on Barrie lasted shoes. However the D in Barrie boots has become quite snug across the top of my foot.
I tried a 7.5E but in hour two of your break-in method determined that this fit was not correct. I am concerned if I move to an 8E it will be too big though. In speaking with Leffot they mentioned that a lot if customers have moved out one width lately in Barrie boots compared to Barrie shoes. So I was curious if you (or anyone else) had this same experience.

I have (or have had) some Barrie boots where my right foot does indeed feel a little tight across the top. I thought it maybe due to my orthotic inserts, but it seems others have had this problem. The left foot feels fine. I didn't want to go up a size or width b/c I feared that this would make the left foot too big (esp. in the heel). Oddly, some Barrie boots that I have don't give me this issue.

Looking at one of my Barrie boots that does have the tightness, it seems to be a problem of volume. Seems a LWB gives much more volume for that part of the foot than a boot.

The tightness hasn't been bad enough where I want to sell the boot. I've just been wearing thinner socks and asking myself, when my grandfather was in the foxholes in WWII ducking enemy fire, did he whine about his $700 boots being too tight?
post #53409 of 87862
Quote:
Originally Posted by MoneyWellSpent View Post

It sounds like the natural edge dressing is exactly what you are looking for then.  It is perfect for sealing the leather, and adds a nice sheen to the sole and heel edges while not altering the original color of the leather.  I use it on my shoes with a natural welt and think it looks great.

I thought the snuff suede PTB had an antique edge trim, not natural?

Natural would work initially, but with nicks and wear and tear I'd want something with color. If I remember correctly there are 4 levels of antique finish, none of which are natural although the lightest may be close.
post #53410 of 87862
Quote:
Originally Posted by TactileOne View Post

Frustrating, in order cover the variation in lasts my searchs on Ebay includes 10.5 and 11. Everytime there's a great pair of shoes that pops up it's in the wrong size. #8 NST .5 size too small, Whiskey LWB .5 size too big, brown suede Indys a .5 size too big, Ravello Captoes .5 size too small. Drat!

I feel your pain.  As an "E" width, I cannot even buy new from many retailers.  Since this rank discrimination is due to demand -- apparently, there just aren't nearly as many of us wide-footed folk (we are on the dragging edge of foot evolution) as the Normal Widers; either that or not nearly as many of us Club Feets are sophisticated enough to spend our money on Alden or other high-quality shoes (or maybe there is an earning differential -- a negative correlation between wide feet and earning power such as CEOs tend to be tall, not short and stubby) -- the scarcity of properly sized Alden shoes  is exacerbated on the secondary market.  

 

Try to enjoy the hunt!

post #53411 of 87862
Quote:
Originally Posted by chipshot View Post

Because of the added length .. Jim of Alden SF suggests on the slip on's Aberdeen last tassels go down 1/2 from Van and Barrie. I have a low volume foot so this might work for me. The Aberdeen tie model he suggests TTS. Wondering what Uncles take is on this staple shoe sizing?

nephew,
Aberdeen last works for me up going up one half size on my barrie last.. I do this both for loafers and tie shoes
post #53412 of 87862
Quote:
Originally Posted by aldenwear View Post

I feel your pain.  As an "E" width, I cannot even buy new from many retailers.  Since this rank discrimination is due to demand -- apparently, there just aren't nearly as many of us wide-footed folk (we are on the dragging edge of foot evolution) as the Normal Widers; either that or not nearly as many of us Club Feets are sophisticated enough to spend our money on Alden or other high-quality shoes (or maybe there is an earning differential -- a negative correlation between wide feet and earning power such as CEOs tend to be tall, not short and stubby) -- the scarcity of properly sized Alden shoes  is exacerbated on the secondary market.  

 

Try to enjoy the hunt!

Wait a minute!  you want to talk foot discrimination?  Many of the "famous" Alden dealers talked about on this forum don't stock above size 12.  Many of the pre-orders stop at size 12.  So "E" width might be an issue, but size 13 and above is a crisis!!!!!

 

I feel your pain!

 

See Ya,

Steve

post #53413 of 87862
Lots of talk about fit lately - which, for a newcomer, must be utterly maddening. biggrin.gif

Nothing beats try-on, and there is no doubt that individual preference plays a part, as do other variables (e.g., insoles, thickness of sock).

Moreover, a person can try on the exact same model in the exact same size and may like how one pair fits and not the other ....

I consider myself TTS US9.5D (and UK8.5E). I wear a thin insole (not ortho) in all my dress shoes (always have, always will; I like how it feels). I don't even know the brand of the insole because it is so old and just keeps on ticking. But I do not wear an insole in any of my loafers, as I find the fit to be better if I don't. So, with all of that said, my sizing usually shakes out as follows:

9C - Van (slip-on)
9D - barrie, tremont, trubalance, plaza (shoes)
9.5B - aberdeen (slip-on)**
9.5C - M-58 (like barrie), M-75 (like Plaza)
9.5D - aberdeen (lace), plaza (boots), grant, hampton, snap, leydon

** If I get a 9.5D in an aberdeen slip-on, my foot damn near comes out of the shoe with every stride given the amount of heep slippage. Even the C width has too much heel slippage for my liking.


But even the above is not without certain exceptions, as I have M-75 and aberdeen models in 10C, I have hampton and aberdeen models in 9D, I have a snap model in 9.5C, and a Barrie model in 9.5B.
post #53414 of 87862
inadvertent double post
Edited by sevenfoldtieguy - 6/14/13 at 12:38pm
post #53415 of 87862
Quote:
Originally Posted by aldenwear View Post

No uncle here.  (Actually, I do not understand the reference for this "uncle" "nephew" business - I guess I came in on the story in the middle, but that is another, and not so important, topic).  I am responding -- forgive me if it is inappropriate and, of course, feel free to disregard -- because I am a longtime owner of Alden shoes on a number of different lasts and recently had a similar experience with Alden slip-ons that you may find helpful.  

I am a big fan of NST's and own a number of such Alden models.  I have bought some NST loafers from Alden in NYC that are on the Grant last.  I wear 7.5E in true-to-size Alden lasts of which Grant (and, for me, Aberdeen) is one.   So I asked for these shoes in that size.   

I am not so proud to say they know me at Alden NYC.  Because these shoes were slip-ons with a high vamp (a design characteristic that the Alden full strap and tassel loafers on the Aberdeen last share), I was encouraged to size down 1/2 size and get 7E to avoid heel slip.  The sales associates are incredibly helpful and knowledgeable and I took the advice.  

This did not work for me.  The ball of my foot hit the 7E too far forward in the shoe -- too much towards the toebox.  My forefoot was also too far forward in the shoe, thus the widest part of my foot was beyond the widest part of the shoe and was a bit squeezed.  Neither of these was a terribly big deal, and the shoes were imminently wearable.  These were noticeable, however, and I would have preferred not to experience them, so I exchanged for my typical size to see what would happen.  Much better for me:  the shoes are looser on my feet in the 7.5E.  But the shoes are well on my feet, my heel lifts ever so slightly, but not out of the shoe, they are comfortable, I think they look great, and I am very pleased.  

I take the moral of this story to be that fit can be individual and, in many instances, is driven by preference rather than ineluctable rules.  For example, I suspect the initial recommendation I received about the NST loafers was based upon a lot of experience where many wearers prefer snugness and certainty that the shoe is not moving on their feet and would not like the looseness that I prefer.  

As to Aberdeen last shoes, they fit me no appreciably differently than Alden shoes made on other other true-to-size lasts and I wear the same size in all of them.  Apparently, some people size differently on Aberdeen than other lasts.  

Our feet are all different, and we experience the sensations of our feet differently -- some are more sensitive than others; some just have clubs down there and rags would not feel much different to them than baby's-butt-soft-French calf.  

Nothing beats try on.  It should not take long to figure out your sizing.  If you are not near a store, I have found that almost all Alden retailers are very easy to work with on finding the right size.  Best of luck and have fun.  

Well put. A good read for people who are trying to dial in their Alden lasts
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Streetwear and Denim

Styles mentioned in this thread:

Styleforum › Forums › Men's Style › Streetwear and Denim › ***The official Alden thread ***