10025
Member
- Joined
- Nov 2, 2008
- Messages
- 16
- Reaction score
- 0
One-button Peak Lapel, Non-Vented Black Tuxedo with Grosgrain Lapels and Piping. Size 42R. $400 or best offer.
Finely detailed with hand stitching throughout and grosgrain facing on lapels, piping on trousers, around pockets (jetted, no pocket flaps) and even on cuff and other buttons.
Cuff buttonholes are non-working but with faux buttonhole stitching (can be converted to working buttonholes easily).
Single-pleated trousers have buttons sewn in front and rear waistband for suspenders/braces. Currently tailored for a 35-36” waist size, 31” inseam (plain hem, no cuffs), but can be adjusted larger or smaller. No visible wear/tear anywhere.
100% Wool (Lining 76% Acetate, 24% Silk). Slightly lighter weight fabric (why I originally chose this one – better for overheated indoor events or outdoor events in warm weather), but drapes well – great suit, just doesn’t fit me anymore. Worn only 3-4 times before I lost a significant amount of weight and ended up buying another one, so has been largely unused. In near-new condition (professionally dry cleaned after most recent use).
Originally cost me ~$1500, and still in great condition.
Some measurements (happy to provide others upon request):
-arm -- cuff to shoulder: 25.5"
-arm -- cuff to middle of collar: 36.5" (can be lengthened or shortened and non-working buttonholes can be moved)
-shoulder to shoulder width: 19.5"
-lapel -- horizontal width at peak: 4"
-lapel -- horizontal width of upper lapel (widest point, just above peak): 2.5"
-jacket -- height from collar midpoint to bottom of jacket: 34.5"
-trousers -- width at cuff: 9.5"
-trousers -- width at waist: 17.25" laid flat (for roughly a 35" waist; can be taken out, there is at least 3.25" of additional material in the seam)
-trousers -- inseam: 30.5" (several inches of additional material to lengthen here)
Finely detailed with hand stitching throughout and grosgrain facing on lapels, piping on trousers, around pockets (jetted, no pocket flaps) and even on cuff and other buttons.
Cuff buttonholes are non-working but with faux buttonhole stitching (can be converted to working buttonholes easily).
Single-pleated trousers have buttons sewn in front and rear waistband for suspenders/braces. Currently tailored for a 35-36” waist size, 31” inseam (plain hem, no cuffs), but can be adjusted larger or smaller. No visible wear/tear anywhere.
100% Wool (Lining 76% Acetate, 24% Silk). Slightly lighter weight fabric (why I originally chose this one – better for overheated indoor events or outdoor events in warm weather), but drapes well – great suit, just doesn’t fit me anymore. Worn only 3-4 times before I lost a significant amount of weight and ended up buying another one, so has been largely unused. In near-new condition (professionally dry cleaned after most recent use).
Originally cost me ~$1500, and still in great condition.
Some measurements (happy to provide others upon request):
-arm -- cuff to shoulder: 25.5"
-arm -- cuff to middle of collar: 36.5" (can be lengthened or shortened and non-working buttonholes can be moved)
-shoulder to shoulder width: 19.5"
-lapel -- horizontal width at peak: 4"
-lapel -- horizontal width of upper lapel (widest point, just above peak): 2.5"
-jacket -- height from collar midpoint to bottom of jacket: 34.5"
-trousers -- width at cuff: 9.5"
-trousers -- width at waist: 17.25" laid flat (for roughly a 35" waist; can be taken out, there is at least 3.25" of additional material in the seam)
-trousers -- inseam: 30.5" (several inches of additional material to lengthen here)
Attachments
-
DSC07854.JPG832 KB · Views: 18
-
DSC07855.JPG947.1 KB · Views: 24
-
DSC07858.JPG1.5 MB · Views: 27
-
DSC07860.JPG1.1 MB · Views: 27
-
DSC07861.JPG2.5 MB · Views: 28
-
DSC07864.JPG945.7 KB · Views: 13
-
DSC07865.JPG1 MB · Views: 28
-
DSC07866.JPG2.2 MB · Views: 36
-
DSC07867.JPG1.8 MB · Views: 22
-
DSC07869.JPG1.9 MB · Views: 27
-
DSC07871.JPG1.2 MB · Views: 20
-
DSC07873.JPG921.7 KB · Views: 22
-
IMG_8304.JPG970.7 KB · Views: 25
Last edited: