or Connect
Styleforum › Forums › Men's Style › Menswear Advice › Navy sports jacket/blazer fit
New Posts  All Forums:Forum Nav:

Navy sports jacket/blazer fit

post #1 of 11
Thread Starter 

Pictures from trying it on:

 

 

 

 

 

 

 

 

 


Edited by TheLostSwede - 8/7/16 at 4:24am
post #2 of 11

Didnt you post this already or was it someone else posting the same jacket?

 

You need to see the fabric in person to be able really tell if it will look like a sports jacket or an orphaned suit jacket. Certainly from the photos it doesnt look like its going to be anywhere near casual enough to look good with jeans but potentially would be fine with more formal trousers as per the image from Suit Supply.

post #3 of 11
Thread Starter 
Hi,

Yes I posted this in a fit advice thread but it didn't get much attention so I thought I'd make a new thread for it.

What would you define formal trousers as? Wool trousers?
post #4 of 11
Quote:
Originally Posted by TheLostSwede View Post

What would you define formal trousers as? Wool trousers?

 

The material is one of the key elements of where a trouser fit on the formal/casual spectrum but its not the only consideration. Cut, finish, pattern etc are all other important considerations 

post #5 of 11

There is one more close-up pic of the fabric at the jacket web page here.

 

To me, it looks textured enough to work as a blazer. If you get it, the easiest way to differentiate it from a suit jacket is to change out the buttons so that they obviously contrast with the cloth. Smoke mother of pearl would look good. Silver or brass would work too.

 

This jacket is too probably nice to wear with jeans but would look good with gray wool flannel or khaki dress chinos.

post #6 of 11

Should work fine as a blazer/SC.

post #7 of 11
Thread Starter 

I went ahead and ordered it. I expect to have it delivered early next week, maybe I'll upload some pictures then :)

post #8 of 11
Thread Starter 

Delivery was faster than expected! I updated the first post with pictures from when trying it on. What do you think?

I definitely think the material can work, it has sort of a black and blue twill pattern, I think it's fantastic and very light weight.

 

Question is, should I downsize one step? I see some minor vertical lines at the back and the shoulders are acting a bit funny when sitting down. Arm length could perhaps be slightly shorter. Can a tailor shorten the arm by like 5-10mm even though it has surgeon buttons without moving the buttons? I'd rather not have them shorten from the shoulder as that is very pricey.

 

As always, your help is much appreciated :)

post #9 of 11
Thread Starter 

Anyone? :)

 

I mainly have to questions:

 

1. Is the fit good enough for a keep (perhaps with some alterations) or should I return it while I still can?

2. As seen in the pictures you can see a small bit of cuff, but with some of my shirts the arms are just a slight shorter and then no cuff is seen when arm is completely relaxed. So is it possible to shorten the arms by about 1 cm (0,4 inches) even though it has working buttons? I mean the buttons will obviously go down 1 cm closer to the cuff but is that really a big deal?

post #10 of 11
Shortening by 1cm should be fine. The standard distance from the center of the closest button to the end of the sleeve is usually 1.25 inches, or 32 mm. Suitsupply actually may make theirs a bit longer than this to allow for small alterations like yours. I wouldnt alter closer than about 1 inch from the end of the sleeve to the center of the closest button.

I don't think I would go down a size. In your first pic you can see the faint lines extending from the button, which means it shouldn't be any tighter. I would take it to a good tailor and ask their opinion on the alterations you suggested. Also you can post in the alterations thread somewhere here.
post #11 of 11
Thread Starter 
Quote:
Originally Posted by oldsmobile98 View Post

Shortening by 1cm should be fine. The standard distance from the center of the closest button to the end of the sleeve is usually 1.25 inches, or 32 mm. Suitsupply actually may make theirs a bit longer than this to allow for small alterations like yours. I wouldnt alter closer than about 1 inch from the end of the sleeve to the center of the closest button.

I don't think I would go down a size. In your first pic you can see the faint lines extending from the button, which means it shouldn't be any tighter. I would take it to a good tailor and ask their opinion on the alterations you suggested. Also you can post in the alterations thread somewhere here.

I just measured and indeed the distance between center of lowest button to sleeve is a good 42 mm (1.65 inches), so a 10 mm reduction should be within margin without looking silly.

I didn't know there was a specific alterations thread, I'll see if I can find it.

 

Thanks for helping :)

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Menswear Advice
Styleforum › Forums › Men's Style › Menswear Advice › Navy sports jacket/blazer fit