or Connect
Styleforum › Forums › Men's Style › Classic Menswear › What should be the right sleeve length for a sport coat/blazer
New Posts  All Forums:Forum Nav:

What should be the right sleeve length for a sport coat/blazer

post #1 of 12
Thread Starter 

Hey, I know this question is asked often and read some post already but, I'm still confused on how should the length of the sleeve be. I've heard from retail shops where by they said the proper length should be "half-knuckle", I assume what the staff meant was half the palm? Also, from online sources that it should be half an inch of the cuffs. Well... which one is it :P?

What I own is a sport coat, I highly doubt I'll be wearing any cufflinks with it.

 

Here's an image of how (excuse my language) darn long my sleeve currently is.

 

Thanks :D 

post #2 of 12
Welcome to Stylefoum Mikeyyip. The sleeve length on your jacket is far too long. It should rest just beyond the wrist and when you extend your arm to shake hands, a 1/4" - 1/2 " sliver of shirt cuff should be visible. Arms down, (arguably) one should not see the shirt cuff and the jacket sleeve should not cover the hand. Your cuff should be taken up 1 1/2" - 2". Hope this helps.
post #3 of 12
I'm afraid I must vehemently disagree with my colleague above. A half inch of shirt cuff should be visible. It looks much better. Your shirt sleeve should end at the narrowest point of your wrist, and your suit sleeve should end a half inch above that. As here: http://www.styleforum.net/t/232891/suit-sleeve-length-rule-and-where-shirt-suit-end/0_100#post_4269511

Your sleeves as pictured above are terribly long. Any sales assistant who even utters the word "knuckle" should be roundly slapped about the head.
post #4 of 12
Agree that it should certainly show some shirt cuff when standing - however only a slight bit.

In the picture it is terribly wrong and should never go over your hand.
post #5 of 12
The right sleeve length should be the same as the left sleeve length, relative to the length of the right and left arm respectively, of course.
post #6 of 12
Somewhere right around the bump on your outer wrist joint and you should show about 1/4 inch of sleeve while standing with your arms relaxed and hanging down. A tailor will be able to determine the best length for you.
post #7 of 12
Too long in the original picture.

Take it to a tailor, you, ideally, want to show around 1/4" as others have mentioned.
post #8 of 12
Quote:
Originally Posted by Ich_Dien View Post

Agree that it should certainly show some shirt cuff when standing - however only a slight bit.

In the picture it is terribly wrong and should never go over your hand.

I agree with this. I think a very small sliver of cuff should be visible with arms at rest.

Any more than that and a comically large amount of cuff would be visible when you're doing things like sitting at a desk and working, etc.
post #9 of 12

Check this out by the Sartorialist:

 

 

 

http://www.thesartorialist.com/photos/the-proper-shirt-sleeve-length/

post #10 of 12
Quote:
Originally Posted by Veremund View Post

I'm afraid I must vehemently disagree with my colleague above. A half inch of shirt cuff should be visible. It looks much better. Your shirt sleeve should end at the narrowest point of your wrist, and your suit sleeve should end a half inch above that. As here: http://www.styleforum.net/t/232891/suit-sleeve-length-rule-and-where-shirt-suit-end/0_100#post_4269511

Your sleeves as pictured above are terribly long. Any sales assistant who even utters the word "knuckle" should be roundly slapped about the head.

Agree 100% that some shirt cuff should be visible when standing with arm hanging down. The amount of cuff shown is to some degree a matter of taste with 1/4 to 1/2 of an inch being OK.
post #11 of 12
Find the correct point on your wrist by bending your thumb up ( as if you giving a thumbs up) with your arm extended at your side and hanging in a natural, relaxed way. The jacket sleeve should rest at the crease in your wrist resting on your thumb. This is an accurate and repeatable point of reference and you want to determine the jacket length separately/independently of the shirt length. You can adjust up or down to meet your personal preference but this is a good starting point. Find the proper jacket sleeve length with a fixed point like this and disregard shirt sleeve length.

There are too many variables regarding shirt sleeve length. Large or tight cuffs and differing sleeve lengths from manufacturers and resulting change in sleeve length from laundering will effect the shirt sleeve length making your shirts vary in how far they extend and are visible below your jacket sleeve. Get the jacket sleeve correct and then adjust your shirt sleeves to the jacket length for a consistent look.
post #12 of 12
Your arms don't vary, so your shirt sleeves shouldn't either. In order for your shirts to fit right, the sleeves and the cuffs must be the correct size. Your jacket sleeves need to show a half-inch of shirt cuff.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classic Menswear
Styleforum › Forums › Men's Style › Classic Menswear › What should be the right sleeve length for a sport coat/blazer