or Connect
Styleforum › Forums › Men's Style › Classic Menswear › Using a local unkown tailor fo a bespoke suit
New Posts  All Forums:Forum Nav:

Using a local unkown tailor fo a bespoke suit

post #1 of 36
Thread Starter 
Having recently moved to Brasil and being unable to return the the UK anytime soon, I was thinking of using a local tailor that I have found to make me a bespoke suit. He uses either material fro UK or Italy (Ermenegildo Zegna).

I have recently had some trousers shortened and the waist taken in by him and the job looks really good.

Obviously, a bespoke suit is something totally different. I have seen some examples for his work and to me, they look really good.

But what should I look out for and what questions should I ask before deciding on having a suit made.

At the moment, the one thing that is holding me back is the price. I have been quoted around 1500 usd.

Any advise would be much appriciated.
post #2 of 36
Nothing else to do but take the plunge in the house style and hope for the best. (unless you know folks who have used him before). If it turns out well you can use that as a springboard toward future commissions.
post #3 of 36
Thread Starter 
thanks, thats what i as thinking.

at the end of the day 1500 isnt a huge amount of money and if the material is good and the cut is ok, at worst it would be an average work suit.
post #4 of 36
I had many suits made by "unknown" tailors. I am of the school that your relationship with the tailor is very important. being a good customer to a small tailor can get you good results.

good luck
post #5 of 36
Thread Starter 
I am of the same train of thought.

I plan to take a few more items for alterations with him on saturday and then discuss more about the bespoke suit. I also want to check if he does shirts.

One thing that slightly dissapointed me was that he wont shorten a sleeve from the shoulder, only the wrist.

Ona a seperate note, if I went for a suite made from the Ermenegildo Zegna material, could I expect the same material that would be used in an actual Ermenegildo Zegna suit?
post #6 of 36
Whilst it can be fun to experiment with a new tailor and sometimes one can strike lucky, that does seem expensive unless you sure of his capabilities. Examine his completed commissions and go in when someone is being fitted so that you can judge the garment being worn.

Pass?
post #7 of 36
One person that was asking me about learning from a certain tailor, that he meet from Chile, When he describe to me how he said to do some parts of a body coat all I could think of is this Chilean Tailor is was very good. A shame to see a tailor of that skill doing alterations. Some tailors are famous on the internet, but, are they really as good as some of the unknown? Short of being a tailor it is hard to know what another tailor can do. Some tailors found that they can make more money doing alterations, so that is what they do. Some tailors don't keep up with the prices they are worth, which is really good for the customers.
post #8 of 36
@greger

I don't think it's just a matter of their tailoring abilities that dictates if one becomes well known or not. Location, working capital, marketing, luck, time; these all play a significant role in determining success. No reason a tailor from Brasil or Chile couldn't do exceptional work, but there are many reasons why no one might know them.

I say, if the work looks good and you like the choice of materials, go for it.
post #9 of 36
Thread Starter 
@ celery

I think thats the problem in Curitiba. Not many big international companies and the tailor is hidden away down town. It turns out that he used to do suits for my finance's dad and he really liked them but as time when on, he was able to buy cheaper suits from the high street despite them no being of the same quality.
This guy has been in business for 41 years. For the samples i have seen, the work does look good. the alterations he has done for me so far are by far the best that i have had done to date and he had some great looking material.

i have made my mind up, im going to give him a go. i will go back on saturday when i have more time to see more samples and discuss the cut, mterial etc.

i will keep everyone posted.
post #10 of 36

Quote:

Originally Posted by blackstone View Post

@ celery
I think thats the problem in Curitiba. Not many big international companies and the tailor is hidden away down town. It turns out that he used to do suits for my finance's dad and he really liked them but as time when on, he was able to buy cheaper suits from the high street despite them no being of the same quality.
This guy has been in business for 41 years. For the samples i have seen, the work does look good. the alterations he has done for me so far are by far the best that i have had done to date and he had some great looking material.
i have made my mind up, im going to give him a go. i will go back on saturday when i have more time to see more samples and discuss the cut, mterial etc.
i will keep everyone posted.


These kinds of guys often produce excellent work, and they are (literally) dying out. If you have recommendations from people you trust and you've seen his work, I would use them while you still can. The quality traditional small-volume bespoke tailor is on the verge of extinction in many places.

post #11 of 36
My 2 euro cents - ask him how much it will be a CMT for a blazer (SC), frankly because there you see the tailor's skill. If the price is ok, buy over e-bay a decent POW SC length (just to see how the pattern alignment is done, details, etc) for something like 50 pounds or less and give it a try.
The other technique is to enquire old customers - the brazilian gents I've met were always good dressers (ok, mainly diplomats) so there is a chance that they were using very good tailors.
The thing is that there might be a chance that his CMT price will be 1/3 of the price and the rest being the fabric - you can source over the net a good deal of high quality fabric at a good price.
Good luck, and keep in mind that it takes over 3 suits to get spot-on fit from a tailor.
post #12 of 36
You need to figure out what's important to you and see if he can meet it- it sounds like you're more interested in construction and skill than say fit or creativity in design. I'm much more interested in the latter and I was very disappointed with a coat I had made on Savile Row, the tailor was very dismissive of my stylistic requests, despite the 'sewing' or whatever being excellent. I've found a couple small, independent tailors that actually listen to me and I enjoy what they do for me at a fraction of the cost. Sounds like this guy might let you be hands-on and a part of the process, which I think would be great.
post #13 of 36
Quote:
Originally Posted by blackstone View Post

Having recently moved to Brasil and being unable to return the the UK anytime soon, I was thinking of using a local tailor that I have found to make me a bespoke suit. He uses either material fro UK or Italy (Ermenegildo Zegna).
I have recently had some trousers shortened and the waist taken in by him and the job looks really good.
Obviously, a bespoke suit is something totally different. I have seen some examples for his work and to me, they look really good.
But what should I look out for and what questions should I ask before deciding on having a suit made.
At the moment, the one thing that is holding me back is the price. I have been quoted around 1500 usd.
Any advise would be much appriciated.

IMO sounds worth a try. But recommend u go trial jacket only first. lesser initial outlay while u decide whether the relationship is working. add trews if it wrks.
what i did
post #14 of 36
Thread Starter 
Quote:
Originally Posted by koolhistorian View Post

My 2 euro cents - ask him how much it will be a CMT for a blazer (SC), frankly because there you see the tailor's skill. If the price is ok, buy over e-bay a decent POW SC length (just to see how the pattern alignment is done, details, etc) for something like 50 pounds or less and give it a try.
The other technique is to enquire old customers - the brazilian gents I've met were always good dressers (ok, mainly diplomats) so there is a chance that they were using very good tailors.
The thing is that there might be a chance that his CMT price will be 1/3 of the price and the rest being the fabric - you can source over the net a good deal of high quality fabric at a good price.
Good luck, and keep in mind that it takes over 3 suits to get spot-on fit from a tailor.

Sorry, being very naive here but I dont understand the acromyns. whats cmt, pow, sc?

i agree with what you have said about a lot of the brasilian gents and this tailor actually tailors for the ex-mayor of curitiba and now governer of Parana state.
post #15 of 36
Thread Starter 
Quote:
Originally Posted by Svenn View Post

You need to figure out what's important to you and see if he can meet it- it sounds like you're more interested in construction and skill than say fit or creativity in design. I'm much more interested in the latter and I was very disappointed with a coat I had made on Savile Row, the tailor was very dismissive of my stylistic requests, despite the 'sewing' or whatever being excellent. I've found a couple small, independent tailors that actually listen to me and I enjoy what they do for me at a fraction of the cost. Sounds like this guy might let you be hands-on and a part of the process, which I think would be great.

after speaking with him, albeit in portuguese and my portuguese isnt good, i believe he will accomodate the style i want so im not so worried about that.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classic Menswear
Styleforum › Forums › Men's Style › Classic Menswear › Using a local unkown tailor fo a bespoke suit