or Connect
Styleforum › Forums › Men's Style › Classic Menswear › Equus Leather - Bridle Leather Belts - Official Affiliate Thread
New Posts  All Forums:Forum Nav:

Equus Leather - Bridle Leather Belts - Official Affiliate Thread - Page 21

post #301 of 1400
Received my two belts yesterday, but only took some quick and dirties of the Navy as Namor wanted to see that one.

Disclaimer: Did this this morning so didn't have a proper chance to dust off shoes properly and I did not wipe off the excess "material" from the belt.




The blue belt from Equus is not as dark as I expected it to be. As you can see it does not match the Navy on my Timberland boat shoes (Left), but does come close to the navy on my Rancourt Venetians (Right) just as Charlie had thought it would.
post #302 of 1400
Quote:
Originally Posted by Winston S. View Post

Received my two belts yesterday, but only took some quick and dirties of the Navy as Namor wanted to see that one.

The blue belt from Equus is not as dark as I expected it to be. As you can see it does not match the Navy on my Timberland boat shoes (Left), but does come close to the navy on my Rancourt Venetians (Right) just as Charlie had thought it would.

 

What color is the 2nd belt?

post #303 of 1400
Thread Starter 
Quote:
Originally Posted by ThinkDerm View Post

gyasih - for suits, lined and raised is your only go to, in 1 and 1/8th inch

It must be said this isn't entirely uncontroversial! The Lined and Raised range is lovely - I make each of them my self and they are lovely objects as well as lovely belts (if I do say so myself). They are pretty heavyweight though - even the Mediumweight is 5mm or so in the centre. Thats fine if thats what you want - not everyones cup of tea though. I'm not trying to put anyone off but wouldnt want anyone to buy one thinking they are like a Hermes calf belt - they aren't and thats not what they are designed to be. If you want a lightweight belt our unlined range is 3 1/2mm so might be a better bet and we can always stitch around the edge if you want that look..

Charlie
post #304 of 1400
Quote:
Originally Posted by ncdobson View Post

What color is the 2nd belt?

Another quick and dirty.



Top to Bottom: Equus West End Hazel in 1.25" and stainless steel, Equus West End Midnight Blue in 1.25" and stainless steel, Tanner Goods Standard in Natural (7 months of wear)
post #305 of 1400
Quote:
Originally Posted by Winston S. View Post


Another quick and dirty.

Top to Bottom: Equus West End Hazel in 1.25" and stainless steel, Equus West End Midnight Blue in 1.25" and stainless steel, Tanner Goods Standard in Natural (7 months of wear)

 

Nice! Thanks.

post #306 of 1400
I just placed an order for the Russet Bakers belt but just realized what a satin finish was... I plan to wear the belt primarily with dark denim so would you think the satin belt would look better than the polished? Anyone with experience on this?
post #307 of 1400
Charlie, do you have any plans on making wallets or other accessories?
post #308 of 1400
Thread Starter 
Quote:
Originally Posted by JonSmythe View Post

I just placed an order for the Russet Bakers belt but just realized what a satin finish was... I plan to wear the belt primarily with dark denim so would you think the satin belt would look better than the polished? Anyone with experience on this?

Jon,

I realise this probably isnt primarily directed at me, but fwiw I think satin with Russet and Denim will work well. Happy to change your order if you like though!

Charlie
post #309 of 1400
Thread Starter 
Quote:
Originally Posted by SHS View Post

Charlie, do you have any plans on making wallets or other accessories?

No plans for wallets or very small leather goods - we hand stitch literally everything, without exeption, so somthing like a wallet becomes very time consuming and thus expensive because theres so much stitching in a good example. I am slowly planning a flapover, simple unlined traditional briefcase though. The design is in my head rather than a reality and we're busy enough time for completely new stuff is difficult to find, I will get it done eventually though and will post development photos when I have any..

Charlie
post #310 of 1400
Sounds interesting, thanks.
post #311 of 1400
Quote:
Originally Posted by JonSmythe View Post

I just placed an order for the Russet Bakers belt but just realized what a satin finish was... I plan to wear the belt primarily with dark denim so would you think the satin belt would look better than the polished? Anyone with experience on this?

If you look at my photo above, the Tanner Goods belt has a matte finish buckle, although I have the option of swapping it out for a polished stainless steel buckle both work for denim. The polished look will make it look dressier though.
post #312 of 1400
Thread Starter 
Quote:
Originally Posted by Winston S. View Post

If you look at my photo above, the Tanner Goods belt has a matte finish buckle, although I have the option of swapping it out for a polished stainless steel buckle both work for denim. The polished look will make it look dressier though.

FWIW our satin finish is a traditional satin kind of look, ie textured but still with the glow of the metal evident and not the really matte shot blasted artificially aged type look. Nothing wrong with that look at all, just posting for the sake of clarity. I'm attaching a photo of one of the watch strap buckles we use that we've satin finished, it probably illustrates the point fairly well.

Charlie

post #313 of 1400
Hey Charlie, I placed my first Equus belt order a few days ago and followed up with an email to Dawn with some requests but haven't got an answer back yet, is there someone else I should be emailing?
post #314 of 1400
Thread Starter 
Quote:
Originally Posted by Clyde View Post

Hey Charlie, I placed my first Equus belt order a few days ago and followed up with an email to Dawn with some requests but haven't got an answer back yet, is there someone else I should be emailing?

Hi Clyde,

I think she did reply, or at least she asked me your question re stamps so I'm pretty sure she did. Our order managment system emails do sometimes get eaten by spam filters though which is a pain for all concerned and I haven't managed to find a way of preventing.

To answer your question though - the belts are all made specifically for their owner so we can customise all aspects of it. No makers mark is absolutely fine if you'd prefer there not to be one - we do normally put one on the back side of the belt behind the buckle. We dont put size marks on the belts - they are all made to measure and we keep records of orders so its a bit superfluous as we can just look sizes up of needs be. I don't know if you want the crease marks that run parallel to the edge of the belt or would prefer the belt without?

Charlie
post #315 of 1400
Thanks, yes definitely do want the crease marks, just no logos and the such. I thrilled to finally have a belt exactly as I want it, really great service you provide. thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classic Menswear
Styleforum › Forums › Men's Style › Classic Menswear › Equus Leather - Bridle Leather Belts - Official Affiliate Thread