or Connect
Styleforum › Forums › Men's Style › Classic Menswear › Critique this bespoke suit from Baron Lee
New Posts  All Forums:Forum Nav:

Critique this bespoke suit from Baron Lee

post #1 of 29
Thread Starter 
Specifically, is it something about the tailoring of this suit jacket that makes it look blocky, or is it just my body shape? Past suits that I have worn have had more padded shoulders, I think, so this is my first experience with a jacket that shows the significant sloping that I have. Is this how it is supposed to look? Is it possible to get a slimmer look out of it?

Just had this made from Baron Lee in Hong Kong. Overall I find the fit to be good and comfortable. With one button buttoned, I can just fit my hand into the front of the suit, and it hugs the body pretty well along the waist. No problems with moving the arms. Normally, the front doesn't crease, making the X near the button; it's just doing that because I tilted my arms out a bit so that you could see the edges of the jacket.
LL
LL
LL
LL
post #2 of 29
the unstructured shoulder is a design choice i believe. i'm no expert, but i'd prefer a higher armhole and lower button stance...
post #3 of 29
Coat appears to be tight, and the sleeves appear to be a 1/4" to 3/8" too long. Also, the balance appears to be off..shorter in the back than the front. I'd head back to the tailor for some adjustments.
post #4 of 29
It looks to me that it has a number of issues. The shoulders fit ok, however the buttonstance is high and a bit too taught. It looks like you could have gone higher with the armholes, shorter with the sleeves, and the overall length looks short. Maybe the front balance being a bit longer is a stylistic choice of the cutter, or your yourself, but the back of the jacket looks very short and even in the front it could come down 1"-2".
post #5 of 29
Sleeves look very long and the body a little short. Try to get lighting from the front instead of the back for your photos, it will make it easier to judge.
post #6 of 29
Way too short, buttoning point way too high. That's why you look so blocky.
post #7 of 29
Terrible for Bespoke, looks like marginally acceptable OTR.
post #8 of 29
too short and too tight which exaggerates your width..hence the blockiness
post #9 of 29
It's way too short, for one. The sleeves need to come up a bit and also the your right shoulder is lower than the left.
post #10 of 29
Quote:
Originally Posted by JG000 View Post
Terrible for Bespoke, looks like marginally acceptable OTR.


No need to make mean comments like this. Remember, he did pay money for it. You could have said: "I think you could have done better with an off-the-rack suit instead."
post #11 of 29
Quote:
Originally Posted by hgcrpd View Post
Specifically, is it something about the tailoring of this suit jacket that makes it look blocky, or is it just my body shape? Past suits that I have worn have had more padded shoulders, I think, so this is my first experience with a jacket that shows the significant sloping that I have. Is this how it is supposed to look? Is it possible to get a slimmer look out of it?

Just had this made from Baron Lee in Hong Kong. Overall I find the fit to be good and comfortable. With one button buttoned, I can just fit my hand into the front of the suit, and it hugs the body pretty well along the waist. No problems with moving the arms. Normally, the front doesn't crease, making the X near the button; it's just doing that because I tilted my arms out a bit so that you could see the edges of the jacket.

most of the replies are right on.
the shoulders are a fine shape except that you have a right low shoulder.
the balance is off. that results in the uneven bottom and wide open lower front.
to learn more go to the search function, ask for the following.
"do you have one low shoulder". dated 1-5-11
"how do they cut a low shoulder" dated 1-5-11
"balance explained" dated 4-7-11

may i ask how many fittings you had? do not count initial measuring or finished suit check up.
post #12 of 29
Thread Starter 
How can you tell that the jacket is too short? When I checked for length, it goes right into the palm of my hand when I cup my hands, which is what I have heard as a rough guide for length. Same for the sleeves - should the cuff of the shirt be showing all the time? The low right shoulder is due to a slight angle in my stance in this photo. I do have a low shoulder, but it's actually my left shoulder (I used to carry a messenger pack, which was slung on my right shoulder). I checked for this at the tailor, so it should be balanced, but I will double check. On tightness, should I have the tailor release the waist a bit? Is that where it is too tight? And how do you tell? I think this may be my fault, since I asked for something slim fitting. I had two fittings before picking up, but I didn't know what adjustments to make after the second fitting. I plan on taking it back for additional adjustments after I figure out what exactly is wrong.
post #13 of 29
More like Baron Greenback.
post #14 of 29
Hmmm...definitely not their best work unfortunately. Some parts look good (shoulders and lapel shape for example), but others could use some work. Here are some points to mention to Peter if you decide to do another commission:

1) lower button stance 1 inch
2) lower length 1 inch
3) shorten sleeves 1/2 inch

I think when you mentioned you wanted a slim fitting suit he thought the high button stance and shorter jacket would fit in with what you wanted. Just a mis-communication it seems which can certainly be rectified in the future.

One thing I notice as well is that the fabric doesn't look great, at least from these photos. Is it a worsted material from his house fabrics? While generally acceptable, those aren't great (the in-house linens are his strong point) and I'd try and bring in something from Harrison's, Minnis, etc next time you go.
post #15 of 29
My experiences with him were always pleasant. When I visited him for the first time, we spent quite a bit of time on the details (missed some of them though) since I'm not 100% sure of what would fit me but Peter nailed them. I developed my style from there on (and trapped into the realm of bespoke *sigh, point of no return I'm afraid). Agree with David on the suggestions. Slightly lower button stance, longer jacket (back should just cover your bum and front should not be too long), shorter sleeve and maybe open the waist slightly.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classic Menswear
Styleforum › Forums › Men's Style › Classic Menswear › Critique this bespoke suit from Baron Lee