or Connect
Styleforum › Forums › Men's Style › Classic Menswear › Why Bespoke Shirts - Part II
New Posts  All Forums:Forum Nav:

Why Bespoke Shirts - Part II

post #1 of 5
Thread Starter 
Why Bespoke Shirts - Part II - Design Your Own Shirt Collar This is a bit of a departure from the rest of my Why Bespoke Shirts series in that this is an interactive section. Here you can design and experiment with various collar styles limited only by your imagination and your shirtmaker's abilities. I invented the Collar Renderer for a program one of my m-t-m shirt companies ran for stores across the United States back in the 1980's. Its purpose was to permit rudimentally trained store personnel to show their customers what their finished collar would look like. As well, it provided my production department with the specifications necessary to create the correct collar. It looks like this: In order to use the Collar Renderer, you need to have Adobe Acrobat. You should first download and print a few copies of the Renderer by clicking here: http://www.customshirt1.com/images/c...er_2005_01.pdf Instructions for use are simple and are printed at the bottom of the Renderer page. Here is what it looks like in use: Here are a few examples with specification details: A basic Point Collar, 3" Point Length with a #3 spread: A medium Spread Collar, 2.75" Point Length with a #6 spread: A Cutaway Collar, 3" Point Length with a #12 spread: The same Cutaway Collar with the point length shortened to 2.5": A bit of variation created by the use of an eraser and a quarter or half dollar to round the points yields A Traditional Round Collar, Nominal 3" Point (before rounding) and a #4 spread: Other variations can be created. For example, the line from "A" to the Dot could be drawn curved using a compass, resulting in a "Pat Riley" collar. The line from the Dot to point "B" can also be curved to give a bit of style to the collar. Putting the Renderer into practice, here is a constructed Medium Spread Collar, 3.25" Point Length, #7.5 spread: Finally, creating collars with tie space is easy. Draw your collar as specified. Then, using scissors, cut the paper vertically, passing through Point "A" and the arrow above the words "point length". Then move the two halves apart a bit and paste them down on another paper. Here's the final result: Hope you have fun with this little shirtmakers' toy. It will serve you well ... and create not only new collar designs, but total apoplexy for your shirtmaker as well. Copyright © 1987-2005 Alexander S. Kabbaz. All rights reserved. Permission is hereby granted for AskAndyAboutClothes.com and Style Forum.net members to print a few copies for their own personal use. A note to shirtmakers: Commercial use of the contents hereof is Strictly Forbidden. Be on notice that we shall pursue all remedies necessary to preserve our copyrights in this material.
post #2 of 5
alex, what is your preference ar far as single or double buttons on the collar. I have a long neck and have used both.
post #3 of 5
Thread Starter 
Quote:
(richardcharles) alex, what is your preference ar far as single or double buttons on the collar. I have a long neck and have used both.
It depends upon your tie space preferences to a large degree. If you like to have 0" or negative tie space, the second button will go a long way towards fighting the physical force of your tie knot which is eternally attempting to push the collar leaves apart. It simply prevents the "fulcrum" effect of a single button. On my personal shirts, dress shirts have two buttons and casual shirt only one.
post #4 of 5
So, if there is some tie space, then the double button arrangement is just for show? B
post #5 of 5
Thread Starter 
Quote:
So, if there is some tie space, then the double button arrangement is just for show?
Unless you are finicky about exactly how much = some. Basically, the second button just locks it in place, be it O" or 1/2" ... or 3" of space.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Classic Menswear
Styleforum › Forums › Men's Style › Classic Menswear › Why Bespoke Shirts - Part II